View Single Post
  #2 (permalink)   IP: 162.199.8.147
Old 04-25-2018, 09:24 AM
romans324 romans324 is offline
 
Join Date: Apr 2018
Posts: 20
Rep Power: 0
romans324 is on a distinguished road
I was able To secure the right side mirror by putting a nut under each screw (2) which made the mirror mount rock solid. The usual crush nuts used from the outside are never that tight to my liking. I took Them out and used a bolt and nut instead. Now the mirror will tighten and does not wobble. The only down side is you must take the door panel off to get the nuts on from the inside of the door.
Reply With Quote