Go Back   tbirdforum.com > Thunderbird Model Years > Early Birds [1955-1957]

Early Birds [1955-1957] Have a Super Sharp 1955 to 1957 Thunderbird or just want to learn about them? Show yours off and talk about them here.

Disc Brake Conversion

This is a discussion on Disc Brake Conversion within the Early Birds [1955-1957] forums, part of the Thunderbird Model Years category; I've had a 56 for a long time, and am hoping to improve the stopping power. I am in the ...

Reply
 
LinkBack Thread Tools
  #1 (permalink)   IP: 134.134.139.70
Old 10-22-2009, 09:34 AM
1956 Fiesta Red T-bird
 
Join Date: Oct 2009
Location: Texas
Posts: 23
Rep Power: 0
DreemKiller is on a distinguished road
Garage
Disc Brake Conversion

I've had a 56 for a long time, and am hoping to improve the stopping power. I am in the process of getting the power brakes fixed (it originally had them, but the booster hasn't been installed for at least the last 20 years), but am also thinking about converting the front brakes to discs (along with improving safety by switching to a dual cylinder master cylinder).
I was wondering if anyone had done this, and if they had any advice about the different kits that are available. Larry's and Concourse Parts have kits for about $950, and Casco has one for $1150 (or so). Does anyone know what the difference (if any) between the kits is? Price isn't the primary factor here, but I'd feel like an idiot for paying $200 more for the same thing.
Reply With Quote
  #2 (permalink)   IP: 198.208.159.17
Old 07-20-2010, 10:05 PM
 
Join Date: Jun 2008
Posts: 2
Rep Power: 0
jchand123 is on a distinguished road
Don't get the one from CASCO. It is not a good quality conversion kit. It splits the system so that there is only power assist to the front disc. It also uses the old Midland booster which does not have enough boost for the front disc. It is not a good system. If you put this on you will have much more pedal effort than you would like and the stoping power is not good at all. The one from concours is the same kit minus the power booster. You probably won't be happy with it either.

I would contact ABSPowerbrake and checkout their kits. These people know what they are talking about and sell a good kit. You might try a hydroboost setup for the booster. It will mount in the same location a the old master cylinder and will provide sufficient boost for your system.
Reply With Quote
  #3 (permalink)   IP: 64.179.201.255
Old 10-19-2012, 08:24 PM
 
Join Date: Nov 2011
Posts: 47
Rep Power: 0
edmlynek is on a distinguished road
i did my 55 in 2003 to 4 wheel disc....the front discs were all bolt on..the kit comes with new spindles,rotors,calipers,hubs ...but no brake lines..i bought stainless brake lines.. but no one had lines for 4 wh. disc.so i bought stock drum brake lines and wound up not using half of it...my vender was stainless steel brake co...they gave the whole kit to me..with double master cly. and proportioning valve correct for 4 wh..and the rear calipers mounted nicely..the emergency brake cables even connected fine and worked!...i would recommend them to anyone doing this swap..i have 20+ photos of every step of this job that can be e-mailed to anyone thinking about doing this but would like to see how this is done before jumping in blind..ed mlynek
Reply With Quote
  #4 (permalink)   IP: 98.224.186.245
Old 08-05-2015, 08:04 PM
 
Join Date: Jun 2014
Posts: 13
Rep Power: 0
tbirdkidd is on a distinguished road
Quote:
Originally Posted by edmlynek View Post
i did my 55 in 2003 to 4 wheel disc....the front discs were all bolt on..the kit comes with new spindles,rotors,calipers,hubs ...but no brake lines..i bought stainless brake lines.. but no one had lines for 4 wh. disc.so i bought stock drum brake lines and wound up not using half of it...my vender was stainless steel brake co...they gave the whole kit to me..with double master cly. and proportioning valve correct for 4 wh..and the rear calipers mounted nicely..the emergency brake cables even connected fine and worked!...i would recommend them to anyone doing this swap..i have 20+ photos of every step of this job that can be e-mailed to anyone thinking about doing this but would like to see how this is done before jumping in blind..ed mlynek
Like to see the pics my email is bilbell19@gmail.com
Reply With Quote
  #5 (permalink)   IP: 222.153.125.206
Old 03-23-2016, 10:45 PM
 
Join Date: Oct 2015
Posts: 8
Rep Power: 0
Mal57bbybrd is on a distinguished road
Garage
Hi, I would love to see your pics too as I would like toi do the front brake disk upgrade to our 1957. Cheers Mal
My email is malcolm@sonatec.co.nz
Reply With Quote
  #6 (permalink)   IP: 107.204.98.179
Old 03-27-2016, 05:43 PM
 
Join Date: Jun 2014
Posts: 13
Rep Power: 0
tbirdkidd is on a distinguished road
Disc Brakes conversion

Here are some pics
Reply With Quote
  #7 (permalink)   IP: 50.169.228.156
Old 04-07-2016, 07:13 PM
 
Join Date: Jan 2015
Location: North Andover, MA
Posts: 40
Rep Power: 0
fordrodsteven is on a distinguished road
Garage
disc brake conversion

I am looking at getting a conversion kit from Kanter. The conversion I am looking at will require that I move the battery because I want the power booster mounted on the firewall. You might consider it a bit pricey at $1200. It seems to me that everywhere else I have found conversions they are not a complete matched set. The Kanter conversion looks to be a complete set-up. Otherwise I would consider talking with a company (like Hill's Thunderbird Center) that has done more than a few conversions.
I'm still a long ways off at this time. I have just started dis-assembly of my car.
__________________
Steve - CTCI # 37081
1955 Tee-bird modified, 88 Reatta, MOPAR11 #735
Reply With Quote
  #8 (permalink)   IP: 74.102.99.192
Old 04-07-2016, 09:26 PM
 
Join Date: Jun 2011
Posts: 317
Rep Power: 44
paul2748 is on a distinguished road
Nothing against Kanter, but I would talk to the TBird suppliers first as they ar completely familiar with TBirds and someone like Hill's and CASCO actually do the conversions.
Reply With Quote
  #9 (permalink)   IP: 50.169.228.156
Old 04-08-2016, 11:06 AM
 
Join Date: Jan 2015
Location: North Andover, MA
Posts: 40
Rep Power: 0
fordrodsteven is on a distinguished road
Garage
Point taken. I must add that I have had a few very good conversations with the technical people at Hill's. I had some questions about taking the body off the frame and they have been VERY helpful!
__________________
Steve - CTCI # 37081
1955 Tee-bird modified, 88 Reatta, MOPAR11 #735
Reply With Quote
  #10 (permalink)   IP: 96.32.2.129
Old 05-27-2016, 12:58 PM
 
Join Date: Dec 2015
Posts: 18
Rep Power: 0
toms$$1956 is on a distinguished road
I already purchased a 56 which has wildwood discs on the front but still only the original master cylinder. I would like to use a dual NON power. Can someone out there recommend a unit that will innerchange with the original with a minimum of issues. thanks Tom
Reply With Quote
  #11 (permalink)   IP: 74.102.99.192
Old 05-27-2016, 11:30 PM
 
Join Date: Jun 2011
Posts: 317
Rep Power: 44
paul2748 is on a distinguished road
Call Wildwood and see what they recommend. For another source for this info try Engineered Components Inc (ECI) in Connecticut and see what they recommend.

Quote:
Originally Posted by toms$$1956 View Post
I already purchased a 56 which has wildwood discs on the front but still only the original master cylinder. I would like to use a dual NON power. Can someone out there recommend a unit that will innerchange with the original with a minimum of issues. thanks Tom
Reply With Quote
  #12 (permalink)   IP: 98.144.44.210
Old 06-25-2016, 11:12 AM
 
Join Date: Jun 2016
Posts: 11
Rep Power: 0
gregoryk7 is on a distinguished road
Garage
Kits

I am getting the complete 4 wheel kit from auto city classic. Everything but the lines are included, even the flex lines. www.autocityclasic.com

Got a set of Torq wheels with cooper RWL for 1100 all included too.
Reply With Quote
  #13 (permalink)   IP: 68.191.33.114
Old 06-25-2016, 02:14 PM
 
Join Date: Dec 2015
Posts: 18
Rep Power: 0
toms$$1956 is on a distinguished road
brake Info

Thanks guys for the information
Reply With Quote
  #14 (permalink)   IP: 104.15.179.52
Old 06-15-2017, 06:59 AM
 
Join Date: Jun 2017
Location: Suwanee GA (outside Atlanta)
Posts: 3
Rep Power: 0
thunderroze is on a distinguished road
Garage
Recently purchased a 57 and am interested in converting at least the front wheels to disc
- with as little other visible modifications as possible. Seems many of these conversion kits require the use of 15" wheels, and relocation of the battery to the trunk [neither are an option for me]. Car has factory power brakes. Any ideas on suppliers of kits that fit my parameters or other ideas? Master cylinder change from stock mandatory??

Also plan to replace all the front steering wear components (ball joints, tie rod ends etc) as long as its apart.
Reply With Quote
  #15 (permalink)   IP: 12.37.4.146
Old 06-15-2017, 09:09 AM
 
Join Date: Jun 2016
Posts: 11
Rep Power: 0
gregoryk7 is on a distinguished road
Garage
Exclamation Disk Brakes

I did all four, don't bother with just the front, do them all. You can keep the battery where it is. Do not get the booster that comes with it. You will also need a proportioning valve. It is a small hydraulic valve with a manually adjustable knob that will need to be set by experience. It will portion the front/back so they are uniform. The manual (no booster) brakes are great without the booster. Make sure that the push rod into the master cylinder is of proper length for the pedal too. WAY safer and better. I got my set at Auto City Classics for $865 and an anti-sway bar kit at Larry's for $469. I suggest you do them both. Larry also has the outside mirrors that are another major safety improvement. I am going to get a tint to the top of the windshield and side glass too.
Reply With Quote
Reply

Tags
brakes, disc, master cylinder, rear sway bar


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -4. The time now is 02:21 AM.


Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0
Garage vBulletin Plugins by Drive Thru Online, Inc.