|
|||||||
| Members don't see the above ads. Register now! | |
| Mechanical and Engine Tuning and Mods Found a way to add horsepower by tuning a few parts? Have some questions about Tuning your own engine? Well post them here and learn from other members. |
This is a discussion on Heads for 94 4.6 within the Mechanical and Engine Tuning and Mods forums, part of the Tech Forums category; What heads will fit on my 94 4.6. I heard that maybe crown vic heads will work??...
 |
|
|
LinkBack | Thread Tools |
01-22-2010, 11:45 AM
|
|||
|
|||
|
Well the 4.6 is used in many Ford vehicles. Crown vics, mustangs and F series. In order to verify if they would fit you would have to look at the head bolt to block pattern as well as the exhaust manifold bolt pattern. To help you verify you may want to look at a aftermarket application chart such as trick flow heads or edelbrock. They will usually list what head application will work with what cars. You could just call them and have them do the work for you! LOL
PS Im assuming that your thunderbird does not have the 32V head on it like some lincolns and the mach 1/svt mustangs. They came on the later years. Last edited by Dirty Birdy; 01-22-2010 at 11:49 AM. 
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
