View Single Post
  #9 (permalink)   IP: 24.163.27.75
Old 08-31-2020, 09:28 PM
Yadkin's Avatar
Yadkin Yadkin is offline
 
Join Date: Aug 2012
Posts: 106
Rep Power: 19
Yadkin is on a distinguished road
Garage
I rigged up a mechanical switch from a motorcycle long ago when I converted to disc brakes. The switch wasn't closing the circuit unless I was braking hard. A new switch didn't help at all. My mechanical switch is a linear type mounted with a long spring on one side and an adjustment bolt on the other. The spring end connects to the dash and the other high on the brake pedal arm. I snipped the wiring from the hydraulic switch connector and pulled them through the dash to connect the new switch. Works like a charm.
Reply With Quote